Understanding your result

The BRE Digest 251 damage scale

BRE Digest 251, published by the Building Research Establishment, is the scale UK surveyors, engineers, loss adjusters and insurers use to grade cracking in low-rise buildings. It runs from 0 to 5. Categories 0 to 2 are usually cosmetic, 3 and 4 affect how the building works day to day, and 5 can affect its stability.

CategoryTypical crack widthWhat it usually means
0 NegligibleUnder 0.1mm (hairline)Hairline cracks. No action needed beyond normal decoration.
1 Very slightUp to 1mmFine cracks, easily treated during normal decoration.
2 SlightUp to 5mmCracks easily filled. Some repointing may be needed and doors or windows may stick slightly.
3 Moderate5 to 15mm, or several over 3mmCracks need opening up and repairing. Doors and windows stick, pipes may fracture and weathertightness is often affected.
4 Severe15 to 25mmExtensive repair, including replacing sections of wall. Frames distort, floors slope and walls may lean or bulge.
5 Very severeOver 25mmMajor repair, possibly partial rebuilding. Walls may need propping and there is a risk of instability.

How the crack check uses it: the full BRE assessment is based on how easily the damage can be repaired, not width alone. A photo only shows width, so the crack check gives a simplified indication on visible width. A Geobear expert on site can give you the full picture.

Why walls crack

Common causes of cracks in UK homes

Most cracks have an everyday explanation. Subsidence is only one possibility, and rarely the most likely.

Very common

Thermal and moisture movement

Brick, block and timber expand and shrink with heat and damp. This usually causes fine, straight cracks that open and close with the seasons.

Very common

Plaster shrinkage

New plaster and plasterboard shrink as they dry, leaving hairline cracks at corners and joints. Cosmetic, and fixed with filler and paint.

Common

Settlement of new work

Extensions and new builds settle slightly in their first few years, often cracking where new meets old. It normally stops once settled.

Common

Lintel problems

A failing or undersized lintel lets brickwork drop above a door or window, causing cracks that run from the corners of the opening.

Less common

Wall tie failure

Rusting ties in older cavity walls expand and push the brickwork apart, causing horizontal cracks at regular intervals in the mortar.

Less common

Subsidence

The ground beneath the foundations moves, often from clay shrinking near trees or soil washed out by leaking drains. Cracks are usually tapered and diagonal.

About the check

What it can and can't tell you

The crack check is a quick first look, not a survey. Here's exactly what it does and where its limits are.

You upload one photo of a crack. Our AI model reviews what is visible in the image, including the crack's width, shape, direction and location, and gives an indication against the BRE Digest 251 damage categories, the most likely causes, and whether the pattern is consistent with ground movement. It takes up to 30 seconds.

BRE Digest 251 is the damage classification published by the Building Research Establishment and used across the UK by surveyors, engineers, loss adjusters and insurers. It grades cracking in low-rise buildings from category 0 (negligible) to category 5 (very severe). Our check applies a simplified version based on visible crack width. The full assessment also considers how easily the damage can be repaired, which a photo cannot show.

No. It is an indication, not a diagnosis. A photograph cannot show what is happening below ground or within the structure. The result is not a structural survey and must not be relied on for insurance, sale, purchase or repair decisions. If you have any concern about the safety of a building, contact a chartered structural engineer.

No. Most cracks in UK homes are not caused by subsidence. Plaster shrinkage, thermal movement, settlement in new builds and failed lintels are all more common. The check is designed to say so, and when a crack looks cosmetic it will tell you that you don't need us.

Possibly. The result is generated fresh by AI each time, so the wording or category can vary between checks, particularly for borderline cracks. Confidence labels are the model's own description, not a measured probability. If the result matters to you, ask a Geobear expert to review it.

Your photo is reduced in size in your browser, sent securely for analysis, and not stored. We do not keep a copy of the image or the result unless you choose to book an assessment.